A wall tie testing kit comprising a tension tester and a test key for checking pull out loads on helical ties. Use it for quality control, pre-specification assessment or in laboratory product approval tests

Quick-fix stainless steel remedial ties with mechanically expanding Neoprene sleeves. Use for cavity tie replacement work in brick masonry or concrete walls. Box of 200

Slip ties for use at movement joints to restrain masonry against lateral wind loads whilst allowing brick walls and masonry panels to expand or contract. Pack of 20

Retrofit lateral restraint tie for softwood. Ties a masonry wall to parallel floor joists in remedial applications. These stainless steel tie bars are suitable for use in solid or cavity walls. - Pack of 5

Wavy tail brick ties for remedial application when re-building one leaf of a cavity wall. Resin wavy tail into existing brickwork and bed triangle into new masonry as building proceeds. 100 Ties.

Stainless steel starter ties for tying a new masonry wall to an existing structure. These stainless steel Tiger Ties have a built in expansion mechanism. No wall plugs are required. Pack of 10

A universal wall starter kit for joining new masonry to existing brick structures. The kit includes stainless steel ties, channels and fixings, which ties wall junctions without the need for keying. Sold as a 5pk

A high quality waterproofing tape that is applied to the lap joints of abutting cavity-drain membranes. This flexible butyl rubber tape forms a water-tight joint seal. 22.5m x 28mm

A wide flexible membrane tape for sealing and waterproofing the wall-floor junction of cavity drain membrane systems. This 150mm wide waterproofing tape is available in 20m rolls

A single sided overseal tape used to seal over the top of lapping membranes. It serves as a vapour barrier and a waterproof seal on externally taped joints 22.5m x 75mm

Hydraplug waterproofing putty is a quick setting cementitious compound. It is mixed with water and applied as a putty to plug and stop active water leaks. 5kg

Basement membrane for tanking walls and floors in basement waterproofing schemes. Cavity drain membranes are available in 40m2 and 48m2 rolls for cost effective basement waterproofing. Multi-Pack: 6 rolls. Sizings: 2 x 20m or 2 x 2.4m.

Wykamol CM 20 mm Hi-Viz cavity drain membrane for waterproofing basement floors. 40 sqm high-visibility yellow tanking membranes are in stock and sold in at trade prices. 2 x 20 m.

CM8 is a versatile 8mm high tanking membrane for use in waterproofing damp proofing applications above and below ground level. Options: Rolls of 40m2 and 48m2

Waterproofing membrane kit with everything needed for waterproofing. Sizings 2 x 20m or 2 x 2.4m of floor or wall. Fix studs to basement membrane plugs for dry-lining walls. Lay screed direct.

Mesh membrane kit in 3 sizes with everything needed for waterproofing wall surfaces. These waterproof tanking membranes include a mesh face for direct application of plaster or dabs for plasterboard. 2.20m or 2.10m sizings

Wykamol CM20 drainage membrane with 20mm studs. It has been developed for use in waterproofing basement and cellar floors. Options 20m2 and 40m2

Double-layered waterproof cavity drain membrane for foundation waterproofing in new-build applications. High density polyethylene membrane bonded to a geotextile mat. Roll size 2m x 20m (40m2)

Wykamol CM3 damp proofing membrane with 3mm studs; ideal for the isolation of internal surfaces from damp walls and floors. Roll Size: 2m x 20m (40m2)

Wykamol tanking slurry is a cementitious water-proofer for internal walls of brick, block or stone. It complies with BS 8102 for Type-A barrier protection. 20kg Bag.

BBA Approved tanking slurry for waterproofing internal surfaces. Suitable for concrete, brickwork and masonry. The tanking complies with BS 8102 for Type-A barrier protection. 20kg Bag.

The Edincare Magna 150 Pumping Station is an automatic sump pump station, pumping foul or waste water to a higher level when gravity drainage is not practical - 150 Litre tank

Ama-Drainer series is part of KSB's latest generation of submersible sump pumps. They have a pumping capacity of 130-240 litres per minute and a 7-12m head, handling waste water with dirt particles up to a particle size of 10mm

Central drainage channel is used in basement waterproofing systems.The channel has no upright flange, suiting basement floors having stepped footings or a central drainage run